Configure handset - RedPocket Mobile

Setup happens automatically

When you insert your SIM card into your Android phone and complete online activation, your phone's APN settings will be configured automatically. Please allow up to 15 minutes for your device to receive a connection. You will receive a text message with your next steps.

If you have no connection and didn't receive your setup text

If you do not receive your setup text message and do not have a connection after 15 minutes, you may configure your APN (access point name) settings manually. Complete the following steps:

Step 1: Connect your phone to WiFi. This step is important.

Step 2: Tap on Settings.

Step 3: Tap on Internet. This may also be called Connections or Wireless & Networks.

Step 4: Tap on Mobile Networks.

Step 5: Tap on Access Point Names or APN Settings.

Create a new APN (Access Point Name) profile. Fill out each of the fields within the form, with the information below:

GSMA	GSMT	CDMA
Name: RedPocket Mobile APN: ERESELLER Proxy: Not set Port: Not set Username: Not set Password: Not set Server: Not set MMSC: http://mmsc.mobile.att.net MMS proxy: proxy.mobile.att.net MMS port: 80 MCC: 310 MNC: 410 Authentication Type: None APN type: default,supl,mms,fota APN protocol: IPv4/IPv6 Bearer: Unspecified	Name: RedPocket Mobile APN: WHOLESALE Proxy: Not set Port: 8080 Username: Not set Password: Not set Server: Not set MMSC: http://wholesale.mmsmvno.com/mms/wapenc MMS proxy: Not set MMS port: Not set MCC: 310 MNC: 280 Authentication Type: None APN type: Default,mms,supl APN protocol: IPv4 Bearer: Unspecified	There are no manual APN settings for the CDMA network. Please remove and reinsert your SIM Card to try and trigger automatic setup.

GSMA

GSMT

CDMA

Name: RedPocket Mobile

APN: ERESELLER

Proxy: Not set

Port: Not set

Username: Not set

Password: Not set

Server: Not set

MMSC: http://mmsc.mobile.att.net

MMS proxy: proxy.mobile.att.net

MMS port: 80

MCC: 310

MNC: 410

Authentication Type: None

APN type: default,supl,mms,fota

APN protocol: IPv4/IPv6

Bearer: Unspecified

Name: RedPocket Mobile

APN: WHOLESALE

Proxy: Not set

Port: 8080

Username: Not set

Password: Not set

Server: Not set

MMSC: http://wholesale.mmsmvno.com/mms/wapenc

MMS proxy: Not set

MMS port: Not set

MCC: 310

MNC: 280

Authentication Type: None

APN type: Default,mms,supl

APN protocol: IPv4

Bearer: Unspecified

There are no manual APN settings for the CDMA network.

Please remove and reinsert your SIM Card to try and trigger automatic setup.

GSMA

Name: RedPocket Mobile

APN: ERESELLER

Proxy: Not set

Port: Not set

Username: Not set

Password: Not set

Server: Not set

MMSC: http://mmsc.mobile.att.net

MMS proxy: proxy.mobile.att.net

MMS port: 80

MCC: 310

MNC: 410

Authentication Type: None

APN type: default,supl,mms,fota

APN protocol: IPv4/IPv6

Bearer: Unspecified

GSMT

Name: RedPocket Mobile

APN: WHOLESALE

Proxy: Not set

Port: 8080

Username: Not set

Password: Not set

Server: Not set

MMSC: http://wholesale.mmsmvno.com/mms/wapenc

MMS proxy: Not set

MMS port: Not set

MCC: 310

MNC: 280

Authentication Type: None

APN type: Default,mms,supl

APN protocol: IPv4

Bearer: Unspecified

CDMA

There are no manual APN settings for the CDMA network.

Please remove and reinsert your SIM Card to try and trigger automatic setup.

Setup happens automatically

Open your phone's camera application and hold it up to the QR code that was sent to you by email (or the one that appears after you finish activation) to scan it. A link will appear, tap on it to start the setup process. If you cannot scan, click the link that is sent to you by email (or the one that appears after you finish activation) instead.

If you have no connection and didn't receive your setup text

Scanning the QR code or clicking the link that was sent to you is the best and quickest way to set up. However, you can also complete your setup steps manually.

Step 1: Connect your phone to WiFi. This step is important.

Step 2: Your phone may undergo a software update to install dual SIM functionality, which is required for eSIM to work.

Step 3: Once the update is finished, tap on Settings.

Step 4: Tap on Connections. This may also be called Network, Internet, or something similar.

Step 5: Tap on the plus sign next to Mobile Network to add a new mobile plan. On some phones, you may need to tap on SIM Card Manager first.

Step 6: Tap on the option to manually enter cellular details. This button may be labeled Enter Manually or Add Using Activation Code.

Step 7: Enter your setup details. Please use SM-DP+ Address based on your network.

For GSMA Our SM-DP+ Address is : rsp-4002.idemia.io
For GSMT Our SM-DP+ Address is : CUST-005-V4-PROD-ATL2.GDSB.NET

Your activation code can be found by clicking the link in the setup message sent to you by email. It looks something like this:

ABCDE-FGHIJ-KLMNO-PQRST

Your confirmation code is an 11-digit number sent to you by email. The confirmation code is optional. After processing the data, your phone may require a software update.

Set your new RedPocket Mobile plan as the primary or secondary number. Your phone might turn off and then back on again.

Physical SIM Card

eSIM

Setup happens automatically

When you insert your SIM card into your iPhone and complete online activation, your phone's APN settings will be configured automatically. Please allow up to 15 minutes for your device to receive a connection. You will receive a text message with your next steps.

If you have no connection and didn't receive your setup text

Newer operating systems (iOS 13 or later) will not allow you to update your APN network settings manually. You may instead remove and re-insert your SIM card into your phone to trigger setup. Be sure to download any carrier settings that are available when you see the Carrier Settings Available popup on your phone.

On older operating systems (iOS 13 or older), you may configure your APN settings manually by completing the following steps:

Step 1: Connect your phone to WiFi. This step is important.

Step 2: On your phone, go to Settings.

Step 3: Tap on Cellular or Mobile Data.

Step 4: Under Cellular, tap on Cellular Data Options or Mobile Data Options.

Step 5: Tap on Cellular Network or Mobile Data Network.

Create a new APN (Access Point Name) profile. Fill out each of the fields within the form, with the information below:

GSMA	GSMT	CDMA
Name: RedPocket Mobile APN: ERESELLER Proxy: Not set Port: Not set Username: Not set Password: Not set Server: Not set MMSC: http://mmsc.mobile.att.net MMS proxy: proxy.mobile.att.net MMS port: 80 MCC: 310 MNC: 410 Authentication Type: None APN type: default,supl,mms,fota APN protocol: IPv4/IPv6 Bearer: Unspecified	Name: RedPocket Mobile APN: WHOLESALE Proxy: Not set Port: 8080 Username: Not set Password: Not set Server: Not set MMSC: http://wholesale.mmsmvno.com/mms/wapenc MMS proxy: Not set MMS port: Not set MCC: 310 MNC: 280 Authentication Type: None APN type: Default,mms,supl APN protocol: IPv4 Bearer: Unspecified	There are no manual APN settings for the CDMA network. Please remove and reinsert your SIM Card to try and trigger automatic setup.

GSMA

GSMT

CDMA

Name: RedPocket Mobile

APN: ERESELLER

Proxy: Not set

Port: Not set

Username: Not set

Password: Not set

Server: Not set

MMSC: http://mmsc.mobile.att.net

MMS proxy: proxy.mobile.att.net

MMS port: 80

MCC: 310

MNC: 410

Authentication Type: None

APN type: default,supl,mms,fota

APN protocol: IPv4/IPv6

Bearer: Unspecified

Name: RedPocket Mobile

APN: WHOLESALE

Proxy: Not set

Port: 8080

Username: Not set

Password: Not set

Server: Not set

MMSC: http://wholesale.mmsmvno.com/mms/wapenc

MMS proxy: Not set

MMS port: Not set

MCC: 310

MNC: 280

Authentication Type: None

APN type: Default,mms,supl

APN protocol: IPv4

Bearer: Unspecified

There are no manual APN settings for the CDMA network.

Please remove and reinsert your SIM Card to try and trigger automatic setup.

GSMA

Name: RedPocket Mobile

APN: ERESELLER

Proxy: Not set

Port: Not set

Username: Not set

Password: Not set

Server: Not set

MMSC: http://mmsc.mobile.att.net

MMS proxy: proxy.mobile.att.net

MMS port: 80

MCC: 310

MNC: 410

Authentication Type: None

APN type: default,supl,mms,fota

APN protocol: IPv4/IPv6

Bearer: Unspecified

GSMT

Name: RedPocket Mobile

APN: WHOLESALE

Proxy: Not set

Port: 8080

Username: Not set

Password: Not set

Server: Not set

MMSC: http://wholesale.mmsmvno.com/mms/wapenc

MMS proxy: Not set

MMS port: Not set

MCC: 310

MNC: 280

Authentication Type: None

APN type: Default,mms,supl

APN protocol: IPv4

Bearer: Unspecified

CDMA

There are no manual APN settings for the CDMA network.

Please remove and reinsert your SIM Card to try and trigger automatic setup.

Setup happens automatically

If you have no connection and didn't receive your setup text

Scanning the QR code or clicking the link that was sent to you is the best and quickest way to set up. However, you can also complete your setup steps manually.

Step 1: Connect your phone to WiFi. This step is important.

Step 2: Your phone may undergo a software update to install dual SIM functionality, which is required for eSIM to work.

Step 3: Once the update is finished, tap on Settings.

Step 4: Tap on Add Cellular Plan.

Step 5: You will see a popup that is using your phone's camera. Tap on Enter Details Manually.

Step 6: Enter your setup details. Please use SM-DP+ Address based on your network.

For GSMA Our SM-DP+ Address is : rsp-4002.idemia.io
For GSMT Our SM-DP+ Address is : CUST-005-V4-PROD-ATL2.GDSB.NET

Your activation code can be found by clicking the link in the setup message sent to you by email. It looks something like this:

ABCDE-FGHIJ-KLMNO-PQRST

Your confirmation code is an 11-digit number sent to you by email. The confirmation code is optional. After processing the data, your phone may require a software update.

Set your new RedPocket Mobile plan as the primary or secondary number. Your phone might turn off and then back on again.

Argentina	Mexico
Brazil	Norway
Canada	Peru
Chile	Romania
Colombia	Slovakia
Estonia	South Korea
Germany	Spain
Greece	Sweden
Italy	United Kingdom
Iceland	Venezuela

Algeria	Japan
American Samoa	Kazakhstan
Andorra	Kuwait
Angola	Laos
Argentina	Liechtenstein
Aruba	Malaysia
Australia	Mariana Islands
Bangladesh	Martinique
Belgium	Mauritius
Bermuda	Mexico
Bhutan	Monaco
Brazil	Mongolia
Brunei	Morocco
Bulgaria	Namibia
Cambodia	Netherlands Antilles - Curacao
Canada	New Zealand
Cayman Islands	Norway
Chile	Pakistan
China	Panama
Colombia	Paraguay
Costa Rica	Peru
Croatia	Poland
Czech Republic	Portugal
Denmark	Puerto Rico
Dominican Republic	Romania
Estonia	Russia
Faroe Islands	San Marino
France	Singapore
French Guiana	Slovakia
Germany	South Korea
Gibraltar	Spain
Greece	Sweden
Guadeloupe	Switzerland
Guam	Taiwan
Hong Kong	Trinidad and Tobago
Hungary	Turkey
Iceland	United Kingdom
India	Uruguay
Indonesia	US Virgin Islands
Ireland	Venezuela
Israel	Vietnam
Italy